488 found, showing page 8 of 13
$4.19
*22-16 RING TERMINAL
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
$11.49
16-14 SPADE TERMINAL
Vinyl-insulated barrel spade terminal for quick and reliable crimp-type wire connections. Rated at 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
$10.79
12-10 SPADE TERMINAL
Vinyl-insulated barrel spade terminal for quick and reliable crimp-type wire connections. Rated at 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
$3.99
16-14 MALE DISCONNECT
Vinyl-insulated barrel male disconnect. Rated at 600 volt maximum. Temperature rating 167 deg (degrees) F (Fahrenheit).
View Details
$6.99
1oz ANTIOXIDANT
Ox-gard antioxidant compound penetrates aluminum oxide to maintain inter-strand and inter-conductive current paths. Guards against oxidation, improves conductivity and produces a cooler connection. Excellent for AL/AL, AL/CU wire connections and aluminum conduit joints.
View Details
$15.99
22-10 AWG BOX CONNECTOR
GB WingGard wire connectors make quick, secure connections with easy-on wing-type design providing positive continuity between conductors. The expandable square wire spring creates a strong vibration-resistant connection. Their tough, thermoplastic shell shields against environmental extremes. The color-coded, high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal specification W-5-610d and are UL486C listed and CSA (Canadian Standards Association) certified. The connector is flame-retardant, nonporous and noncorrossive, and resists surface cracking and chemical action. Temperature rated to 221 degrees Fahrenheit. UL (Underwriter's Laboratories) listed.
View Details
$16.99
22-6AWG WING CONNECTOR
GB WingGard wire connectors make quick, secure connections with easy-on wing-type design providing positive continuity between conductors. The expandable square wire spring creates a strong vibration-resistant connection. Their tough, thermoplastic shell shields against environmental extremes. The color-coded, high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal specification W-5-610d and are UL486C listed and CSA (Canadian Standards Association) certified. The connector is flame-retardant, nonporous and noncorrossive, and resists surface cracking and chemical action. Temperature rated to 221 degrees Fahrenheit. UL (Underwriter's Laboratories) listed.
View Details
$21.49
*14-6AWG WING CONNECTOR
GB WingGard wire connectors make quick, secure connections with easy-on wing-type design providing positive continuity between conductors. The expandable square wire spring creates a strong vibration-resistant connection. Their tough, thermoplastic shell shields against environmental extremes. The color-coded, high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal specification W-5-610d and are UL486C listed and CSA (Canadian Standards Association) certified. The connector is flame-retardant, nonporous and noncorrossive, and resists surface cracking and chemical action. Temperature rated to 221 degrees Fahrenheit. UL (Underwriter's Laboratories) listed.
View Details
$11.49
HEAVY DUTY GROUND CLAMP
Set screw type. Serrated clamp swings apart for easy installation. Steel screws are plated to resist corrosion. Pressure cast brass. For use with copper water pipe or EMT conduit. 1 per bag. UPC coded. UL listed.
View Details
$5.29
*CLAMP GROUND ZINC
(L160) Set screw type. Zinc die-cast. For use with copper water pipe or EMT conduit, 1/2", 3/4", and 1". For No. 2 to No. 10 AWG solid or standard bare copper ground wire. UPC coded. UL listed.
View Details
$11.29
BRZ GROUND CLAMP
Set screw type. Serrated clamp swings apart for easy installation. Steel screws are plated to resist corrosion. Pressure cast brass. For use with copper water pipe or EMT conduit. 1 per bag. UPC coded. UL listed.
View Details
$5.99
5/8" GROUND ROD CLAMP
Silicon bronze ground rod clamp, standard duty. Maximum service and conductivity. Listed for direct burial. #10 solid to #2 stranded AWG (American Wire Gauge). UL and CSA listed.
View Details
$3.89
HEAT SHRINK TUBE
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
$3.89
HEAT SHRINK TUBE 1/4"X4"
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
$3.89
TUBE HEAT SHRINK 1/2"X4"
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
$3.89
HEAT SHRINK TUBE
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
$4.89
10-12 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$3.89
HEAT SHRINK TUBE
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
$9.39
8-10 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$3.89
HEAT SHRINK TUBE
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
$9.39
6-8 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$8.19
4-8 SPLIT BOLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$10.79
2-6 SPLIT BOLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$13.99
1-4 SPLIT BOLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$21.49
4/0-12 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
$10.49
*22-14AWG CAP CONNECTOR ORANGE
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
View Details
$13.99
22-10 AWG WIRE CONNECTOR 74B YLW
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
View Details
$18.99
16-10 AWG WIRE CONNECTOR 76B RED
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
View Details
$10.29
BLK SILICONE REPAIR TAPE
Silicone self-sealing repair tape. High quality tape that insulates all shapes of conductors to 400 volts. Insulates and seals surfaces from -65 deg (degrees) C (Celsius) to 260 deg C or -85 deg F (Fahrenheit) to 500 deg F. Fuses to itself in seconds to stay water tight. Permanent mold in 24 hours or in minutes with heat application. Stretches up to 300\% its original length. Ideal for electrical applications, plumbing projects, hose and tool repair, and more. 700 PSI rating.
View Details
$4.19
12-10 RING TERMINAL
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
$2.59
1" CUSHION CLAMP
Clamps are manufactured from the toughest of materials to resist common solvents, alkalis, dilute mineral acids, most organic acids, and most petrochemicals. Steel strap with 1 hole for attachment, rubber insert also reduces vibration. Ideal for applications where vibrations may occur. Secure with 1/4" screw.
View Details
$3.79
2 PORT PUSH IN CONNECTOR
PushGard wire connector. Features include no twist connection, low insertion force for fast, easy application. Accepts solid and many stranded wire combinations. Clear shell makes connection easy to inspect. Rated to 600V maximum, shell rated to 105 degrees Celsius. Check port for continuity testing. Electrolytic tin-plated internal copper bus for high conductivity. Accepts #22 to #12 AWG wire. UL (Underwriter's Laboratories) listed and CSA (Canadian Standards Association) certified.
View Details
$17.49
100PK TAN TWST WING NUT
Ideal Twister wire connector features contoured wings, ribbed cap, and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
$12.79
100PK ORG WIRE NUT
Ideal Wire-Nut wire connector features fixed square-wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell is rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
$17.99
100PK RED WING NUT
Ideal Wing-Nut wire connector features contoured wings and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
$15.99
100PK YEL WING NUT
Ideal Wing-Nut wire connector features contoured wings and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
$3.89
3/16" HEAT SHRINK TUBING
Polyolefin tubing shrinks under heat application to insulate wiring up to half its diameter. Useful for repairing cords and covering tool handles. Makes strong rope loops and neat ends. 600V/mil dielectric strength. 2 to 1 shrink rate. 4".
View Details
$16.99
OPEN END SPLICE CAP
Open-end construction splice cap for ease in cutting wires flush with caps. Caps easily removed without damaging wire. Zinc-plated steel. Wire range: No. 18 thru 10 AWG, minimum 2 No. 6, maximum 2 No. 10 with 1 No. 12. 100 per pack.
View Details
$3.79
100PC 4" NATRL CABLE TIE
Self-locking, 1-piece molded nylon ties easily secure wire bundles, cables, and more. Natural color, self-extinguishing. Serviceable from -40 Deg (degrees) F (Fahrenheit) through 185 Deg F. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) approved.
View Details
$2.59
1/4" NYLON CLAMP
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
View Details
